6 53210A Math, Graphing, and Data Logging
188 Keysight 53210A User’s Guide
The maximum delay setting is 99:00:00.
Starting the Data Logger
Pressing the Run softkey enables data logging. Data logging begins following any
specified start delay when a valid path/file exists. A default path and file name of:
Internal\DataLog
is used when the data logger application is started. Select Yes to overwrite the file
and begin.
Viewing Readings
A trend chart is populated as readings are logged. After data logging completes,
the readings are stored in the file specified. Pressing View Results when logging is
stopped and the readings are saved, or when logging is complete, displays a trend
chart of the saved readings.
Figure 6-12 is an example of a trend chart as readings are logged. (Figure 6-8 and
Figure 6-10 contain more information on the trend chart window.)
To Next Page
Loading...
