Preparation for Use 1
Keysight 53210A User’s Guide 45
The emulation mode can also be enabled using the command:
SYSTem:LANGuage "<language>"
SYSTem:LANGuage? (query form)
- language selects the SCPI command set used. Specifying 53181A enables the
emulation mode. Specifying either
53210A disables the mode.
With 53100-series compatibility mode selected, all programming is through the
counter's remote interface (LAN, USB, GPIB). The counter display responds
according to the remote commands received.
Pressing any front panel key while in 53100 compatibility mode returns the
counter to 53200 series mode as prompted. Setting or changing to either mode
requires the instrument to be restarted. When updating the instrument firmware
“53210A mode” must be set.
Documentation of the
53181A command set is not provided with this (53210A)
instrument. Usage of this older SCPI command set is discouraged for new use,
but is available for customers who require it.
Securing the Instrument
The 53210A counter can be secured to the National Industrial Security Program
Operating Manual (NISPOM) standard as shown below.
To Next Page
Loading...
