4 Remote Interface Reference
150 Keysight E3633A and E3634A User’s Guide
SCPI Conformance Information
The Keysight E3633A and E3634A DC Power Supplies conform to the ‘1996.0’
version of the SCPI standard. Many of the commands required by the standard are
accepted by the power supply but are not described in this manual for simplicity
or clarity. Most of these non-documented commands duplicate the functionality
of a command already described in this manual.
SCPI confirmed commands
The following table lists the SCPI-confirmed commands that are used by the
power supply.
DISPlay
[:WINDow][:STATe] {OFF|ON}
[:WINDow][:STATe]?
[:WINDow]:TEXT[:DATA] <quoted string>
[:WINDow]:TEXT[:DATA]?
[:WINDow]:TEXT:CLEar
INITiate[:IMMediate]
MEASure
:CURRent[:DC]?
[:VOLTage][:DC]?
OUTPut
[:STATe] {OFF|ON}
[:STATE]?
[SOURce]
:CURRent[:LEVel][:IMMediate][:AMPLitude]
{<current>|MIN|MAX|UP|DOWN}
:CURRent[:LEVel][:IMMediate][:AMPLitude]? [MIN|MAX]
:CURRent[:LEVel][:IMMediate]:STEP[:INCRement]
{<numeric value>|DEFault}
To Next Page
Loading...
Need help?
General
