General Information 1
Keysight E3633A and E3634A User’s Guide 25
Description
The Keysight E3633A and Keysight E3634A DC power supplies feature a
combination of programming capabilities and linear power supply performance
that makes them ideal for power systems applications. The power supply is
programmable locally from the front panel or remotely over the GPIB and RS-232
interfaces. This power supply has two ranges, allowing more voltage at a lower
current. An output range needed is selected from the front panel or over the
remote interfaces.
Operational features include:
– Dual range of single-output:
– 8V/20A and 20V/10A (Keysight E3633A)
– 25V/7A and 50V/4A (Keysight E3634A)
– Constant voltage (CV) or constant current (CC) operation
– Overvoltage protection (OVP) and overcurrent protection (OCP)
– Three storage locations (1 to 3) for user-defined operating states
– Automatic turn-on self-test
– Remote sensing for load voltage at the front or rear panel terminals
– User calibration from the front panel or over the remote interfaces
The front panel operation permits:
– Easy-to-use of knob control
– Output range selection
– Enabling or disabling OVP and OCP features
– Setting the OVP and OCP trip levels
– Clearing OVP and OCP conditions
– Setting and displaying the voltage and current limit values
– Saving and recalling operating states
– Returning the power supply to local mode from remote interface mode
– Retrieving/Scrolling error messages on the display
To Next Page
Loading...
Need help?
General
