Keysight E3634A - Non-SCPI Commands

Remote Interface Reference 4
Keysight E3633A and E3634A User’s Guide 153
Device specific commands
The following commands are device-specific to the Keysight E3633A and Keysight
E3634A power supplies. They are not included in the ‘1996.0’ version of the SCPI
standard. However, these commands are designed with the SCPI standard in mind
and they follow all of the command syntax rules defined by the standard.
Non-SCPI commands
APPLy {<voltage>|DEF|MIN|MAX>}[,{<current>|DEF|MIN|MAX}]
APPLy?
CALibration
:COUNt?
:CURRent[:DATA] <numeric value>
:CURRent:LEVel {MIN|MID|MAX}
:CURRent:PROTection
:DAC:ERRor
:SECure:CODE <new code>
:SECure:STATe {OFF|ON},<code>
:SECure:STATe?
:STRing <quoted string>
:STRing?
:VOLTage[:DATA] <numeric value>
:VOLTage:LEVel {MIN|MID|MAX}
:VOLTage:PROTection
OUTPut
:RELay[:STATe] {OFF|ON}
:RELay[:STATE]?
SYSTem
:LOCal
:REMote
:RWLock