1General Information
30 Keysight E3633A and E3634A User’s Guide
Rack mounting
The power supply can be mounted in a standard 19-inch rack cabinet using one of
three optional kits available. A rack-mounting kit for a single instrument is
available as Option 1CM (P/N 5063-9243). Installation instructions and hardware
are included with each rack-mounting kit. Any Keysight System II instrument of
the same size can be rack-mounted beside the Keysight E3633A or E3634A DC
power supply.
Remove the front and rear bumpers before rack-mounting the power supply.
To remove the rubber bumper, pull the bumper off from the top as there are
protrusions on the sides and bottom of the cover.
To rack mount a single instrument, order adapter kit 5063-9243.
To Next Page
Loading...
Need help?
General
