Keysight E3633A and E3634A DC Power Supplies
User’s Guide
39
2 Initial Operation
Preliminary Checkout 40
Power-on Checkout 41
Output Checkout 43
There are three basic tests in this chapter. The automatic power-on test includes a
self-test that checks the internal microprocessors and allows the user visually to
check the display. The output check ensures that the power supply develops its
rated outputs and properly responds to operation from the front panel. For
complete performance and/or verification tests, refer to the Service Guide.
This chapter is intended for both the experienced and the inexperienced user
because it calls attention to certain checks that should be made prior to
operation.
Throughout this chapter the key to be pressed is shown in the left margin.
To Next Page
Loading...
Need help?
General
