2Initial Operation
42 Keysight E3633A and E3634A User’s Guide
4 Enable the outputs.
The OFF annunciator turns off and the 8V
[1]
or 25V
[2]
, OVP, OCP, and CV
annunciators are lit. The blinking digit can be adjusted by turning the knob.
Notice that the display is in the meter mode. “Meter mode” means that the
display shows the actual output voltage and current.
[1] For Keysight E3633A Model
[2] For Keysight E3634A Model
If the power supply detects an error during power-on self-test, the ERROR
annunciator will turn on. See “Error Messages” on page 156
To Next Page
Loading...
