Keysight E3633A and E3634A DC Power Supplies
User’s Guide
47
3 Front-Panel Operation
Front-Panel Operation Overview 48
Constant Voltage Operation 50
Constant Current Operation 53
Storing and Recalling Operating States 56
Programming Overvoltage Protection 58
Programming Overcurrent Protection 63
Remote Voltage Sensing at the Front and Rear Terminals 67
Disabling the Output 71
Disabling the Output Using an External Relay 72
Knob Locking 73
System-Related Operations 74
Remote Interface Configuration 79
HPIB Interface Configuration 84
RS-232 Interface Configuration 85
Calibration Overview 90
So far you have learned how to install your power supply and perform initial
operation. During the initial operation, you were briefly introduced to operating
from the front panel as you learned how to check basic voltage and current
functions. This chapter will describe in detail the use of these front-panel keys and
show how they are used to accomplish power supply operation.
Throughout this chapter the key to be pressed is shown in the left margin.
See “Error Messages” on page 156 if you encounter any errors during
front-panel operation.
To Next Page
Loading...
Need help?
General
