Keysight E5071C ENA Series RF Network Analyzers 21
Installation
Blown Fuses
Blown Fuses
If the fuse appears to have blown during operation, this instrument may be
subject to failure and must be repaired. For any assistance, contact Keysight
Technologies Customer contact center.
The product uses the following fuse type:
Option 230/235/240/245/280/285/430/435/440/445/480/485: UL/CSA Type,
Slow-Blo, 6.3 A-250 Vac.
Option 2K5/4K5: UL/CSA Type, Slow-Blo, 10 A-250 Vac.
DO NOT replace the fuse yourself; doing this may expose you to electrical
shock.
To Next Page
Loading...
