Keysight E5071C ENA Series User Manual

24 Keysight E5071C ENA Series RF Network Analyzers
Installation
Starting the E5071C
2-
Figure 2-7 Line switch (Always ON) and power cable receptacle
Disconnection from Supply Source
The power supply of the E5071C is cut off by disconnecting the plug of the
power cable (on either AC outlet side or E5071C side). When it is necessary to
disconnect the power supply in order to avoid shock hazards, etc., pull out the
power cable plug from either the AC outlet side or the E5071C side.
To allow this operation to be performed smoothly, be sure to follow the
guidelines in “Ensuring Adequate Free Space around Analyzer for
Immediate Disconnection of Power Cable in Case of Emergency” on
page 15. When turning the power OFF under normal circumstances,
always follow the methods described in “Turning the Power ON and OFF”
on page 22

Keysight E5071C ENA Series Specifications

General

Number of Ports	2 or 4
Dynamic Range	>123 dB (typical)
Connectivity	LAN, USB, GPIB
Display	10.4-inch LCD
Trace Noise	0.004 dB rms
Impedance	50 Ohm
Weight	20 kg
Dimensions	426 mm × 177 mm × 407 mm