Keysight E5071C ENA Series User Manual

9
Keysight E5071C ENA Series RF Network Analyzers
Installation Guide
1 Introduction
This chapter introduces the documentation for Keysight E5071C and the
overview of this manual to use this manual efficiently. See this manual first
when you use the E5071C for the first time.
Manuals for E5071C
Keysight provides the following three manuals for E5071C. The latest version of
all documentations can be downloaded from
http://www.keysight.com/find/e5071c-manual.
Contents of This Manual
The following shows the contents of this manual.
o Installation Guide
The installation guide (this manual) provides start up setup information when
you use the E5071C for the first time and troubleshooting information when
the Windows cannot be boot up.
o Online Help
The Online Help provides the information about the measurement operation,
programming, built-in VBA, I/O interface This is pre-installed in the E5071C.
Press [Help] hard key on the front panel to open.
o Service Guide
The service manual provides information about the parts, troubleshooting,
performance test, adjustment and service menu.
o Chapter 1, “Introduction.”

Keysight E5071C ENA Series Specifications

General

Number of Ports	2 or 4
Dynamic Range	>123 dB (typical)
Connectivity	LAN, USB, GPIB
Display	10.4-inch LCD
Trace Noise	0.004 dB rms
Impedance	50 Ohm
Weight	20 kg
Dimensions	426 mm × 177 mm × 407 mm