Overview 1
Keysight E6961A User Guide and Method of Implementation 21
Table 1-2 List of tabs available
Tab Description
Set Up Lets you identify and set up the test environment.
Select Tests
Lets you select the tests you want to run. After tests are run, status indicators show which tests have
passed, failed, or have not run.
Configure
Lets you configure test parameters (for example, oscilloscope channels used in test, number of
averages, etc.).
Connect Shows you how to connect the oscilloscope to the device under test.
Run Tests
Starts the automated tests. If the connections to the device under test need to be changed, the test
pauses, shows how change the connection, and waits for you to confirm that the changes were made
before continuing.
Automation Lets you construct scripts of commands to drive execution of the application.
Results
Contains more detailed information about the tests that have been run. You can change the thresholds
at which marginal or critical warnings appear.
HTML Report Report Shows a compliance test report that can be printed. See “Viewing the Test Report” on page 45
To Next Page
Loading...
