Keysight M8194A - Page 151

Keysight M8194A 120 GSa/s Arbitrary Waveform Generator User Guide 151
Remote Programming 4
Description Use this query to define the size of a waveform memory segment. If
<init_value> is specified, all sample values in the segment are
initialized. If not specified, memory is only allocated but not initialized. If
the query was successful, a new <segment_id> will be returned. The
segment will be flagged write-only, so it cannot be read back or stored.
Examples Query
Define a write-only segment with length 1280 samples on channel 1.
Returns the segment Id.
:TRAC1:DEF:WONL:NEW? 1280
:TRACe[1|4]:DELete
Command :TRACe[1|4]:DELete <segment_id>
Query
Parameters <segment_id>
Parameter Suffix None
Description <segment_id> must be 1
Delete a segment. The command can only be used in program mode.
Examples Command
:TRAC:DEL 5
:TRACe[1|4]:DELete:ALL
Command :TRACe[1|4]:DELete:ALL
Query
Parameters None
Parameter Suffix None
Description Delete all segments. The command can only be used in program mode.
Examples Command
:TRAC:DEL:ALL