Keysight M8194A - Page 98

98 Keysight M8194A 120 GSa/s Arbitrary Waveform Generator User Guide
3 M8194A Soft Front Panel
0.9,1.0
…
3 channels (without markers):
0.7,0,65,0.36
0.8,0,66,0.35
0.9,0,67,0.34
…
4 channels (without markers):
0.7,0,65,0.36,-0.1
0.8,0,66,0.35;-0.2
0.9,0,67,0.34;-0.33
…
The CSV format may contain optional header information as follows:
• Parameter Header - The parameter header contains optional header
parameters as name and value pairs separated by ‘=’. Each parameter
should be specified in a single line. This header is optional. There are
following header parameters:
• SampleRate - The sample rate.
• SetConfig - Flag to indicate if the header parameters need to be set.
This can be set to either ‘true’ or ‘false’. If this flag is ‘false’ header
parameters will not be set. If this flag is omitted header parameters are
set.
• Data Header - The data header contains the names of the data
columns separated by ','. The waveform data are specified after the
data header. This header is optional. If this header is not specified the
data need to be defined similar to CSV files without the header (see
above). The data columns are as follows:
• Y1 - Waveform data for channel 1.
• Y2 - Waveform data for channel 2.
• Y3 - Waveform data for channel 3.
• Y4 - Waveform data for channel 4.
• SampleMarker1 - Sample Marker for channel 2.
• SampleMarker2 - Sample Marker for channel 3.