Safety features of your vehicle
183
Removal and installation
To remove the headrest, raise it as far
as it can go then press the release
button (1) whilst pulling upward (2).
To reinstall the headrest, put the
headrest poles (A) into the holes (3)
whilst pressing the release button
(1). Then adjust it to the appropriate
height.
Armrest (if equipped)
To use the armrest, pull it forward
from the seatback.
Folding the rear seat
The rear seatbacks may be folded to
facilitate carrying long items or to
increase the luggage capacity of the
vehicle.
WARNING
Make sure the headrest locks in
position after adjusting it to
properly protect the occupants.
OCD038018
OCD038019
WARNING
The purpose of the fold-down
rear seatbacks is to allow you to
carry longer objects than could
not otherwise be accommodat-
ed.
Never allow passengers to sit
on top of the folded down seat-
back whilst the car is moving as
this is not a proper seating
position and no seat belts are
available for use. This could
result in serious injury or death
in case of an accident or sud-
den stop. Objects carried on the
folded down seatback should
not extend higher than the top
of the front seats. This could
allow cargo to slide forward and
cause injury or damage during
sudden stops.
To Next Page
Loading...
