319
Safety features of your vehicle
The rear seatbacks may be folded
forward to provide additional cargo
space and to provide access to the
cargo area.
• To raise the seatback, lift and push
it firmly until it clicks into place.
• When you return the seatback to
its upright position, reposition the
rear safety belts so that they can
be used by rear seat passengers.
To fold down the rear seatback:
1. Set the front seatback to the
upright position and if necessary,
slide the front seat forward.
2. Lower the rear headrests to the
lowest position.
CAUTION
• When folding or unfolding the
rear seat, make sure to move
the front seat fully forward. If
there are not enough space to
fold the rear seat, never fold it
by force. It will cause damage
to the headrest or the related
parts of the seat.
• Before using the seat belt, be
sure to remove it from the
holder. If you pull out the seat
belt whilst it's in the holder, it
may damage the seat belt or
holder.
• Use the holder only when there
is no passenger in the rear seat
or when you need to fold the
rear seat.
WARNING
Do not fold the rear seat, if the
driver's position is not properly
set according to the driver's
physical figure after folding the
rear seat. A sudden stop or col-
lision may cause injury.
To Next Page
Loading...
