Version 1.1.0.x KICstart
32 KICstart User Manual
Selecting the thermocouples and starting a profile
This screen displays the live readings from the KICstart profiler for all thermocouples selected, as long as
the hardware is properly connected. Make sure the KICstart profiler has a fresh battery and is powered on.
Selecting Thermocouples - To select a thermocouple, check the box next to the thermocouple number.
The live temperature is displayed beneath each thermocouple label only when the KICstart is on and
connected properly.
Thermocouple Labels - Optionally you can check the box to include thermocouple labels. When this box
is checked you can type a text label for each selected thermocouple. 20 character maximum.
Distance from the Air TC – Measure and
enter the distance from the Air TC to each
thermocouple used, including the Wave TCs.
Select the Help Measurement (Tape Measure
Help) button for an example of how to
correctly measure the distance from the Air
TC.
Select this button
to start a profile.
To Next Page
Loading...