J-2April 2003 76-100016-002
PEGAsys™ LV
J-2.1.3 NETWORK GROUP NUMBER
ASSIGNMENT
Nodes may be assigned to groups 0 through 32. A node
assigned to network group 0 receives and processes mes-
sages received from all nodes only if configured to “Log All
Events." A node assigned to groups 1 through 32 will pro-
cess only those messages from nodes in the same net-
work group unless configured to “Log All (Network) groups."
J-2.1.4 RESET ENABLE/DISABLE
Enabling RESET on a node means that it can be reset
from any other node in its group. If it is assigned to net-
work group 0, it can be reset from any node on the net-
work.
J-2.1.5 SILENCE ENABLE/DISABLE
Enabling SILENCE on a node means that it can be silenced
from any other node in its group. If it is assigned to net-
work group 0, it can be silenced from any node on the
network.
J-2.1.6 EVENT LOGGING ENABLE/DISABLE
Enabling “Log All Events” causes all network events to be
logged at this node. This includes the receipt of an AC-
KNOWLEDGE from a button on a remote node. Disabling
will result in logging events only in it’s own (non-zero) group.
J-2.1.7 TIME RESYNCHRONIZATION PERIOD
(SET IN MINUTES)
A time-resynchronization message is broadcast on the net-
work at intervals determined by the resynch period. If a node
does not receive a resynchronization message during this
interval, it uses its network connection to ask for the time, or
uses its own locally stored time if its query does not result in
a resynch message.
3. SET
1. TIME:DATE
2. PRINTER
3. DEVICES
7. NETWORK
4. PROGRAMMING
7. CLEAR EVENTS
8.RESYNCH NETWORK
2. NODE NUMBER
1. STYLE
3. GROUP
4. ADD/RMV NODES
5. RESET EVENT
6. SILENCE EVENTS
9. ISOLATE
7. LOG EVENTS
CH1: ENABLE/DISABLE CH2: ENABLE/DISABLE
NODE NUMBER ( 1 TO 64) 0: STAND ALONE
GROUP NUMBER ( 1 TO 64) 0: NOT GROUPD
ADD OR REMOVE NODE#__ TO NODE# __
ENABLE/DISABLE NETWORK RESET
ENABLE/DISABLE NETWORK SILENCE
1:ISOLATE NODE 2:DE-ISOLATE NODE
8. RESYNC PERIOD
SET RESYNC: 0(off) OR 1-60000 MIN
LOG ALL GROUP OR ONLY NETWORK EVENTS
CLEARS ALL EVENTS INITIATED FROM REMOTE NODES
AND REQUESTS A RETRANSMISSION OF ALL EXISTING
EVENTS FROM ALL NODES
Figure J-2. Network Menu
To Next Page
Loading...
Need help?
General
