6
-
7
3-POINT HITCH IMPLEMENT AND LOADER OPERATION
6
-
6
DS4110(HS) / DS4510(HS)
6
6
-
7
3-POINT HITCH IMPLEMENT AND LOADER OPERATION
6
-
6
DS4110(HS) / DS4510(HS)
T66O122A
INSTALLING PTO SHAFT
1. Consult your local KIOTI Dealer
for selection of the universal joint.
2. When selecting a universal joint,
make sure that it is not too short to
come off the its female and male
shafts at the highest position or
too long to impact its female and
mail shafts at the lowest position.
3. Move the joint back and forth to
check that its lock pin is proper-
ly seated to the groove of the PTO
shaft.
(1) Universal Joint
H11O682A
C56O140A
Make sure that the PTO safe
cover is in its position before
driving the PTO shaft.
The PTO shaft and universal
j o i n t s h a f t s h o u l d n o t b e
interfered by any surrounding
parts.
Never go close to the rotating
PTO shaft or universal joint
shaft. A severe accident can
happen.
WARNING
(1) Lock Pin
M50-EU-06.indd 7 2009-09-15 오전 9:51:11
To Next Page
Loading...
