H11O655A
3. If the fuse is blown, replace it with
a new fuse with same capacity.
Make sure it is rmly installed.
4. Install the fuse box cover.
If the replaced fuse is blown
soon, it is probable that the
wiring system is faulty. In this
case, contact your local KIOTI
Dealer.
If the relay or other electrical
component is faulty, contact
your local KIOTI Dealer.
Never use a fuse with the ca-
pacity higher than specied on
the fuse box cover.
If using a faulty fuse, steel
wire, or foil, the electrical de-
vice can be damaged or even
can catch a re.
WARNING
NOTE
There are marks for the fuse capac-
ity and location on the cover of the
fuse panel. Replace the fuse accord-
ing to the following procedure:
1. Turn the key switch to the “OFF”
position and turn off all the electri-
cal devices.
2. Open the fuse box cover and
check the fuse in question using
fuse tongs.
To Next Page
Loading...
