9
-
6
DS4110(HS) / DS4510(HS)
causE counTErmEasurEs
6.Electricsystemis
faulty
Turn signal lamps do not blink
The bulb is blown. Replace it.
The blinking device is faulty. Repair or replace it.
The ground and terminal wirings are poorly contacted.
Check and clean them.
Work lamps do not come on
The bulb is blown. Replace it.
The ground and terminal wirings are poorly contacted.
Check and clean them.
※
Ifyoudonotndthecauseoftrouble,consultyourdealerforassistance.