3. Make sure the fuel cock is in the
open position.
(1) Fuel Cock (A) Close
(B) Open (C) Air Bleeding
(1) Forward/Reverse Lever
(2) P.T.O Switch
(3) Range Gear Shift Lever (Hi-Lo)
(4) Main Gear Shift Lever
4. Place the PTO switch to the “OFF”
position. (It cannot be started
while the PTO is engaged)
5. Set the main, range and shuttle
shift levers in the neutral position.
H61O501A
H61O502C
(1) Position Control Lever
(A) “DOWN”
6. Lower the attachment by pushing
the position control lever forward.
H61O503A
M a k e s u r e t h a t n o o n e i s
around the implement or be-
hind the tractor.
WARNING
To Next Page
Loading...
