A75UM3EF (Ver. E.2)
3-103
2. “Layout b.”
Images are printed on one sheet of copying media in 1 row.
Normally “Layout b.” is used together with the Auto Zoom Mode since you may have variant width
of originals but it is preferable to print these images as wide as the copying media.
If originals are different in width each other, therefore, they are scanned in different zoom ratios
one by one automatically so that each image should be as wide as the copying media.
The Auto Zoom Mode is automatically selected without pushing the Auto Zoom Key if only you
validate the Set Copy Mode and select the “Layout b.”.
As for the Auto Zoom Mode, refer to the page 3-28.
If you do not wish to use the Auto Zoom Mode, refer to “Reference” on the page 3-110.
To Next Page
Loading...
