A75UM3EF (Ver. E.2)
3-104
3. “Layout c.”
Images are printed on one sheet of copying media in 2 rows.
“Layout c.” is used together with the Auto Zoom Mode normally in order to reduce or enlarge each
image to be half of copying media in width.
If originals are different in width each other, they are scanned in different zoom ratios one by one
automatically similar to the case of “Layout b.”.
If neighboring 2 images are different in length after reduction or enlargement, corresponding
margin is provided to the shorter one of them.
The Auto Zoom Mode is automatically selected without pushing the Auto Zoom Key if only you
validate the Set Copy Mode and select the “Layout c.”.
As for the Auto Zoom Mode, refer to the page 3-28.
If you do not wish to use the Auto Zoom Mode, refer to “Reference” on the page 3-110.
To Next Page
Loading...
