Kirisun DP580 - 5.6 Application; 5.6.1 Setting GPS (Digital Channel Only)

User Manual
30
To view the ID, SN, firmware version and hardware version of the radio, perform the followings.
1. In the home interface, press the Menu key.
2. Select “Setting” by pressing the Up and Down keys.
3. Press the Menu/OK key.
4. Select “Radio Information” by pressing the Up and Down keys.
5. Press the Menu/OK key.
5.6 Application
5.6.1 Setting GPS (Digital Channel Only)
To display the locating information of the radio, or submit updated locating information to the location application
server, you need to enable the GPS function. This is set using the programming software.
To enable/disable the GPS function or view GPS information, perform the followings.
1. In the home interface, press the Menu key.
2. Select “Application” by pressing the Up and Down keys.
3. Press the Menu/OK key.
4. Select “GPS” by pressing the Up and Down keys.
5. Press the Menu/OK key.
 To enable/disable the GPS function, take the 6~9 steps below after the step 5.
6. Select “GPS Switch” by pressing the Up and Down keys.
7. Press the Menu/OK key.
8. Enable/disable it.