A-61635 December 2010 4-99
Batch tab Batching is the operation of counting pages or documents. This tab is only
available when the scanner is in Image Address mode.
Enable batch — enables batching and the other options on this tab.
Level — sets the level to count. The options are Level 1, Level 2, and Level
3. The level you want to count must exist in the image address template as
defined on the Image Address tab.
Size — define the number of documents to be counted prior to beginning the
action to take place when the count has been reached.
Start function — defines the action to be taken prior to processing the first
document in a batch. Options are Level 1, Level 2, Level 3 and None.
End function — select an option of what you want the scanner to do at the
end of a batch:
• Stop feeder and transport
• Continue scan and start new batch
Image Address Options — these options appear on all the tabs. For detailed
information about these options, see the section “Image Address options”
previously in this section.
To Next Page
Loading...