How to Use This Document
AT000115-02 9
Section 2: How to Use This Document
Introduction
The purpose of this manual is to assist field and service engineers when providing service and
supporting the Point-of-Care 120\140 CR Readers.
This manual is a supplementary document to the Point-of-Care CR Reader Service Manual. Please
review the Service Manual before applying the procedures described in this manual.
The manual lists various types of problems and error messages and detailed explanations of suggested
fix directions.
The Chapters in this Manual
Hardware Error Messages
Provides information concerning hardware failure driven error messages and measures to take to fix
them. For each failure there are recommendations for the user and recommendations for the field/
service engineer.
Software Error Messages
Provides information for all software error messages and measures to take to fix them. For each failure
there are recommendations for the user and recommendations for the field/service engineer.
General CR Failures
Provides information for general failures in the CR Reader and how to fix them.
Image Artifacts
Provides images of all known artifacts, origin causes for each of them and what steps to take in order
to fix the problem.
Tests
Tests
– Provides information for general tests which are used in some of the chapters above.
For your convenience you can access the specific failure directly by clicking the relevant line in the
Table of Contents.
To Next Page
Loading...
