2-24 A-61854 April 2016
5. Select Generate EasySetup PDF.
6. Print the EasySetup Configuration page.
7. Place the EasySetup Configuration page into the scanner’s input
tray and press and hold the i button for 4 seconds on the Operator
Control Panel. The message In use by EasySetup will be
displayed on the Operator Control Panel.
8. Press the Scan button on the scanner’s Operator Control Panel.
The scanner will be configured using the settings from the
EasySetup Configuration page.
NOTE: If needed, you can send this document to remote scanner
users. Each scanner user, will need to scan the EasySetup
Configuration page. Each scanner will be configured using the
settings from the EasySetup Configuration page.
To Next Page
Loading...
