A-61854 April 2016 2-23
Optional: EasySetup
1. Click Print EasySetup. The EasySetup Configuration page will be
displayed.
2. Enter a description in the EasySetup page description field.
3. Select how you want to apply these settings: to any scanner or a
specific scanner. If you select specific to S/N, you must enter the
serial number of the scanner you want to save these settings to.
4. If you want to apply a password, check the Apply Admin password
box and enter the password.
NOTES:
• Depending on your selection of any scanner or specific to S/N,
warnings or errors may be displayed that may need to be addressed
before you can generate an EasySetup page.
• For a description of the settings on this page, see the section entitled,
“Using the special EasySetup Configuration page” later in this
chapter.
To Next Page
Loading...
