2-22 A-61854 April 2016
Verify your settings and click OK. A confirmation message will be
displayed and the OK button will appear when the activity completes
with the Completion status displayed.
When applying a new network configuration, the scanner will restart
and the wireless network you were connected to may have changed. If
changed, you will need to reconnect to that network before you can
access the web page again. If you have more than one scanner that
you want to configure, continue with the Optional: EasySetup steps to
configure all of your scanners; then close the browser. Your scanner will
now be ready to use.
Print EasySetup — when selected, displays all of the settings that will
be applied to the EasySetup encrypted barcode page. Select Generate
EasySetup PDF to generate a PDF file. Depending on your browser,
that PDF will either be displayed or you will be prompted to save it. If
displayed, you can print the page or save it as an EasySetup
Configuration page. This page contains all of the settings that you
entered on the Network and Device tabs. For more information see the
section entitled, “Advanced EasySetup considerations” later in this
chapter.
To Next Page
Loading...
