Konica Minolta bizhub PRESS 1250 User Manual

bizhub PRESS 1250/1052 5-5
5.2 Replenishing Toner Supply
5
5.2 Replenishing Toner Supply
This machine is equipped with a toner hopper to store a bottle stock of toner so that the machine can keep
printing for a while even if toner in the toner bottle is used up.
When toner in the toner bottle is used up and toner supply from the toner hopper becomes low, the message
[Please add toner] will be displayed in the message area, and the toner supply icon will be displayed in the
machine status indicator area at the bottom-right corner of the screen. When toner in the toner hopper also
runs out, the message will change to [Toner is used up / Exchange toner bottle].
In the Supply/Scrap Parts area of the Machine Screen, the messages [Toner bottle can be exchanged (Res-
idue in Hopper: 3/4)], [Exchange toner bottle (Residue in Hopper: 1/4)], and [Toner is used up. Exchange toner
bottle] will also be displayed in sequence according to the amount of toner remaining in the toner hopper.
0 Before changing a toner bottle, be sure to check the toner type number indicated on the front of toner
bottle cover, and use a toner bottle of the same number. Using wrong toner bottles may cause machine
trouble.
0 Use the cap of new toner bottle for the used one, then place it into the package. For the subsequent
treatment, please contact your service representative.
7 WARNING
DO NOT THROW a toner bottle (including an empty one) into a fire!
If thrown into a fire, toner may ignite and cause a dangerous situation.
- For handling an empty toner bottle, please contact your service representative.

Konica Minolta bizhub PRESS 1250 Specifications

General

Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Network Connectivity	Ethernet, USB
Maximum Paper Size	13 x 19.2"
Print Speed (Black/A4)	125 ppm
Warm-up Time	Less than 4 minutes
Weight	Approx. 440 lbs (200 kg)