Konica Minolta bizhub PRESS 1250 User Manual

bizhub PRESS 1250/1052 11-7
11.2 If [Mishandled paper] Message Is Displayed
11
11.2.2 Precautions for Removing Mishandled Paper from Paper Feeder Unit PF-703
Withdrawal of Paper Feeder Unit PF-703 trays
Paper Feeder Unit PF-703 trays may not be withdrawn immediately when mishandled paper occurs, be-
cause of its paper suction system. Make a pause before withdrawing the tray. Please take the same step for
Large Capacity Post Inserter PI-PFU, having similar mechanisms.
11.2.3 Precautions for Removing Mishandled Paper from Perfect Binder PB-503
7 CAUTION
DO NOT touch the glue tank unit.
- The internal glue tank unit is very hot. If you touch them, you may get burned. Please be especially care-
ful when you push the glue tank unit backward in place.
11.2.4 Precautions for Removing Mishandled Paper from Saddle Stitcher SD-506
7 CAUTION
Removing Stuck Staples
Staples are very sharp!
- Be careful of removing staples stuck inside the machine so as not to get injured.
11.2.5 Precautions for Removing Mishandled Paper from Finisher FS-532
7 CAUTION
Removing Stuck Staples
Staples are very sharp!
- Be careful of removing staples stuck inside the machine so as not to get injured.
Pulling out and pushing back the stacker of Finisher FS-532
You may not be able to pull out the stacker because it is automati-
cally locked.
Also, at times you may not be able to push the pulled-out stacker
back into place because it is locked.

Konica Minolta bizhub PRESS 1250 Specifications

General

Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Network Connectivity	Ethernet, USB
Maximum Paper Size	13 x 19.2"
Print Speed (Black/A4)	125 ppm
Warm-up Time	Less than 4 minutes
Weight	Approx. 440 lbs (200 kg)