Konica Minolta bizhub PRESS 1250 User Manual

bizhub PRESS 1250/1052 8-59
8.9 Using Large Capacity Stacker LS-505
8
5 Return the carriage to its original position, then close the large
capacity stacker door.
NOTICE
When returning the stacker unit to its original position, fit the
two projections of the carriage to the two holes of the stacker
unit. If the stacker unit is not properly set, the carriage cannot
be returned to its original position.
8.9.3 To Secure Paper on Carriage
1 Remove the paper stopper from the carriage.
2 Mount the paper stopper on the paper holder.
% Fit the two projections of paper stopper to the holder, then
raise the other side as illustrated.
3 Hold the paper using the paper stopper.
% Turn the paper stopper to the paper.
NOTICE
Do not push it too strong. Otherwise, output sheets may be torn
or wrinkled.

Konica Minolta bizhub PRESS 1250 Specifications

General

Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Network Connectivity	Ethernet, USB
Maximum Paper Size	13 x 19.2"
Print Speed (Black/A4)	125 ppm
Warm-up Time	Less than 4 minutes
Weight	Approx. 440 lbs (200 kg)