Konica Minolta bizhub PRESS 1250 User Manual

bizhub PRESS 1250/1052 5-24
5.4 Loading Cover Paper for Perfect Binding
5
5.4 Loading Cover Paper for Perfect Binding
The cover paper to be used for perfect binding can be loaded in the following trays.
- Cover tray of Perfect Binder PB-503
- Main body trays (Trays 1 and 2)
- Paper Feeder Unit PF-703 (Trays 3 to 8)
- Paper Feeder Unit PF-706 (Trays 3 to 8)
- Large Capacity Post Inserter PI-PFU
- Post inserter of Folding Unit FD-503
This section describes how to load cover paper into the cover tray of Perfect Binder PB-503.
5.4.1 Loading Cover Paper in Cover Tray of Perfect Binder PB-503
0 Paper setting for cover tray can be made in [Tray Setting] from the Machine Screen or in [Output Setting]
from the Copy Screen. The setting cannot be made in [Paper Presetting] from the Copy Screen.
1 Withdraw the cover tray.
2 Open the feed roller.
3 Load cover paper with the front side up.
% Align it to the feed roller side.
NOTICE
Do not load above the limit level indicated on the side guide of
the tray.
Carefully load cover paper to be seated under the paper control
lever at the air nozzle.

Konica Minolta bizhub PRESS 1250 Specifications

General

Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Network Connectivity	Ethernet, USB
Maximum Paper Size	13 x 19.2"
Print Speed (Black/A4)	125 ppm
Warm-up Time	Less than 4 minutes
Weight	Approx. 440 lbs (200 kg)