Various Messages
The LCD screen may display the following messages indicating the status of the
instrument. Refer to the relevant description page when you see one of these messages.
1. First Startup
When the instrument is started for the rst time, you need to select a display language and
set the date and time. You will see screens that prompt you for these operations.
Refer to the pages describing the procedures and complete the settings.
When a language has not been set
(page 60)
When the date and time have not been set
(page 58)
2. Daily Operation
Although the following messages may be displayed during daily operation, they do not
indicate any abnormality.
Refer to the relevant page and follow the instruction.
Every time the power switch is set to OFF, this
message is displayed to indicate that the
instrument is saving settings.
When the periodic calibration alert is set to ON
and the instrument has passed the next
calibration due date (page 52)
When the battery voltage is low (page 20)
17
To Next Page
Loading...
