1. By Measurement and Registration
Operating Procedure
6
Measuring button
1
8 3, 5, 7
2, 4
3, 4
1. While the measurement screen is
displayed, press the
MENU
key.
The setting screen is displayed on the LCD
screen.
2. Press the
RIGHT
key or
LEFT
key to
display the [Target] screen.
3. Press the
UP
key or
DOWN
key to
select [Measure and Register] and then
press the
ENTER
key.
4. The screen for selecting the target to
be registered is displayed. Press the
UP
key or
DOWN
key to select the
target.
[Target] - [Measure and Register]
72
Measurement
Preparation
TARGET
To Next Page