Selecting the Maximum/Minimum Value
[Meas. Cond.] -
[Peak/Valley Meas.]
You can select a value to be obtained as the measurement result from the latest value,
maximum value, and minimum value.
The maximum or minimum value is determined based on the L
v value.
* Measurement result selection: OFF, maximum value < Peak measurement >, or minimum value < Valley
measurement >
* Factory setting: OFF
Operating Procedure
1
5 3
2
3, 4
1. While the measurement screen is
displayed, press the
MENU
key.
The setting screen is displayed on the LCD
screen.
2. Press the
RIGHT
key or
LEFT
key to
display the [Meas. Cond.] screen.
3. Press the
UP
key or
DOWN
key to
select [Peak/Valley Meas.] and then
press the
ENTER
key.
32
Settings
PEAK/
VALLEY
To Next Page