Konica Minolta CHROMA METER - Page 33

4. The screen for selecting the
synchronized measurement mode is
displayed. Press the
UP
key or
DOWN
key to select whether to set
the synchronized measurement to [ON]
or [OFF].
5. When you select [ON], press the
ENTER
key to display the screen for
setting the synchronization frequency.
6. Press the
UP
/
DOWN
key and the
RIGHT
/
LEFT
key to set the
synchronization frequency and then
press the
ENTER
key.
If the entered value is out of the available range,
an alert screen is displayed. Press the
ENTER
key to return to the previous screen and reset
the value.
7. Press the
ESC
key twice.
The measurement screen is displayed on the
LCD screen.
The synchronized measurement mode setting is
stored even when the power switch is set to
OFF ().
When the synchronized measurement is set to ON, the specied integration time is
disabled and the measurement is performed in the Auto mode.
31
Settings
SYNC MODE