Konica Minolta CHROMA METER - Setting the Measurement Result Saving

Setting the Measurement Result Saving
[Options] -
[Save Meas.]
You can set whether the instrument saves measurement results automatically or not.
* Factory setting: Manual
Operating Procedure
1
5 3
2
3, 4
1. While the measurement screen is
displayed, press the
MENU
key.
The setting screen is displayed on the LCD
screen.
2. Press the
RIGHT
key or
LEFT
key to
display the [Options] screen.
3. Press the
UP
key or
DOWN
key to
select [Save Meas.] and then press the
ENTER
key.
46
Settings
SAVE MEAS.