Konica Minolta CHROMA METER - Deleting All Stored Data

Deleting All Stored Data
[Meas. Result]/[Target]/
[User Calibr.] - [Delete All Data]
You can delete all of the stored measured values by following the procedure below.
(This function is intended for deleting the values stored for [Meas. Result], [Target] or [User
Calibr.].)
Operating Procedure
1
6 4, 5
2, 5
3
1. While the measurement screen is
displayed, press the
MENU
key.
The setting screen is displayed on the LCD
screen.
2. Press the
RIGHT
key or
LEFT
key to display the [Meas. Result],
[Target] or [User Calibr.] screen.
3. Press the
UP
key or
DOWN
key to
select [Delete All Data].
90
Measurement
DELETE