Konica Minolta CHROMA METER - Page 91

4. The list of stored values is displayed.
Press the
UP
key or
DOWN
key to
select the item you want to delete.
You can see the details of the selected item by
pressing the
RIGHT
key.
You can check the measurement condition,
target, user calibration value, etc. by pressing
the
INFO
key.
When no data has been stored, "Measurement
data not found." is displayed. When no target or
user calibration data is stored it is displayed as
"- - -".
5. When you press the
ENTER
key, a
conrmation message is displayed.
Press the
RIGHT
key or
LEFT
key to
select [Yes] or [No] and press the
ENTER
key to conrm the action.
6. Press the
ESC
key twice.
The measurement screen is displayed on the
LCD screen.
89
Measurement
DELETE