Konica Minolta DiMAGE G400 - Formatting a Memory Card

108
Formatting a Memory Card
-Formatting a card returns it to the initial state (when it was purchased).
- Caution: Formatting erases all data, even images that are protected (p.101).
- Always format cards inside the camera. If a card is formatted by a computer
it may not perform normally.
Using the Set-up Menu (Cont’d)
1. Select “FORMAT”.
Use the  or  button to select the type
of media to be formatted and then
press the SET/DISP. button.
2. You will be asked for confirmation. To
execute formatting, select “YES” with
 or  and press the SET/DISP. button.
• If you decide not to format, select “NO” and
press the SET/DISP. button.
2
1