71
Using the Movie/Voice Mode Menu (Cont’d)
Adjusting Exposure Compensation
- If you wish to brighten or darken an entire image, use the exposure
adjustment function.
- The exposure can be corrected ±2.0 EV in adjustment steps of 1/3 EV.
- The compensation value is displayed on the monitor.
- This option is also available in the mode menu for Manual (p.74).
1. Select the Exposure Compensation
setting menu option.
• The current setting is displayed.
“EXPOSURE ±0.0” is displayed as the
default setting.
2. Use the 왖 or 왔 buttons to select the
desired exposure compensation.
Press the SET/DISP. button to
complete the setting and return the
camera to shooting mode.
•Even after a correction, there are times when the change is not apparent, such as
when the subject is in a semi-dark place.
• When flash is used, the compensation effect may not be sufficient.
1
To Next Page
Loading...
Need help?
General
