119
Using the Set-up Menu (Cont’d)
Adjusting the Date and Time
- If the battery is removed for approximately 24 hours or more, the date and
time settings will be lost. In this case, please reset the date and time.
Select “DATE SET”, press the SET/DISP.
button and the date and time settings
screen appears.
See Steps 3 to 5 on pages 29 and 30 about
how to make the settings.
1
Changing Languages
-You can use the method below to change the language displayed on the
LCD monitor.
Select “LANGUAGE”, press the SET/DISP.
button and the language settings screen
appears.
See step 1 to 2 on page 29 for instructions
on making the settings.
Setting the Auto Power-OFF Time
-You can change the Auto Power-OFF not-in-use interval starting at 3 minutes
(default).
- Select “AUTO POWER OFF” and then use the SET/DISP. button to select
“10 MIN” or “OFF”.
• If you select OFF, the Auto Power Off function is disabled and care is needed to avoid
depleting the batteries. When you have finished taking pictures or playing back images,
switch the power off by closing the lens cover or switching off the LCD monitor to
prevent battery depletion.
To Next Page
Loading...
Need help?
General
