94
Using the PLAY Menu (Cont’d)
Copying and Moving Images
-You can use the procedure described below to copy or move still images or
movies you have shot to another media.
-For protected images, you must cancel their protection before you can move
them.
1. Select “COPY & MOVE”.
2. Use the or buttons to select the
mode.
After selecting the media mode, use
the SET/DISP. button to select the
media to which the data will be copied
or moved.
• If there are no images on the selected
media or no card is inserted, the media
cannot be selected.
3. Select the unit mode and then use the
SET/DISP. button to select “SELECT”
(to select one frame or multiple frames)
or “ALL ON”.
2
1
3
To Next Page
Loading...
