122
Connecting with a USB cable
-Turn OFF the power supply to the camera.
- There is no need to turn off your PC power supply when connecting or
disconnecting the USB cable to the camera.
Connecting to your PC (Cont’d)
1. Turn on the power supply to your PC, and
start up the Windows or Mac OS.
2. When the normal Windows or Mac OS
screen appears, open the cover on the
camera's USB terminal and connect the
camera to the computer with the USB cable.
• Please use only the USB cable supplied with the camera.
• While the camera is connected to your PC, the camera is inoperable.
• While connected to your PC, do not detach the USB cable or open the battery/
card cover.
•Turn the power supply to the camera OFF when detaching the USB cable.
After detaching the USB cable, close the USB terminal cover.
• When communicating with your PC, we recommend using the AC adapter (sold
separately). Attach/detach the AC adapter when the camera power supply is
OFF and your PC and the camera are not connected.
To USB
connector on PC
To Next Page
Loading...
Need help?
General
