134
Check this: Page
• Battery level too low 21
• Battery inserted incorrectly 21
•AC Adaptor attached incorrectly 24
• Battery level too low 21
• The battery has reached the end of
its service life.
→ Fit a new battery 13,20
•Low ambient temperature 137
•Power supply not on. 28
• SD Memory Card or Memory Stick’s
write protected. 15
• Pictures taken have reached the
maximum number.
→ Erase unwanted pictures. 51
• Set to the Self-Timer mode. 61
• Flash being charged. 45
• Subject not in the center 41
• Subject hard to focus 41
• Dirty lens 34
• Incorrect distance from the subject 36
• LCD brightness adjusted incorrectly 112
• Finger prints or dirt on the monitor 133
• Set to “Flash off” mode 46
- If the following does not solve your problem, please contact the point of
purchase.
Troubleshooting
Symptom
Power will not turn ON
Power turns OFF right
after turning on
Can’t take a picture
even if pressing the
shutter button
Can’t focus
LCD monitor display
and images are not
clear
Doesn’t Flash
Power
Supply
Shooting
the
pictures
To Next Page
Loading...
Need help?
General
