78
Using the Manual Mode Menu (Cont’d)
Taking Pictures in Aperture Mode
- In this mode, the camera automatically sets the shutter speed after you
select the aperture setting.
-Focus value differs with zoom magnifications and can be switched to 2
levels according to magnification.
2
1
1. Select “APERTURE”.
2. When you press the SET/DISP. button,
the current aperture setting appears on
the LCD monitor and you can then set
the aperture to the desired setting.
Use the button to set the aperture
and then take the picture.
•You can also use the or buttons to
set the exposure compensation.
• Each time you press the button, the functions of the , and buttons change.
When the aperture setting is displayed in white, the aperture and exposure settings
can be specified. However, by pressing the button, the functions of the , and
buttons can be changed to White Balance (), Macro mode () and Flash mode ()
respectively.
• As with Program mode (p.76), AE lock and AF lock (p.77) can be used to take pictures
in Aperture mode.
To Next Page
Loading...
Need help?
General
