Grandstage X
-
Panel description and functions
16
L/MONO, R jack
These are 6.3 mm TRS phone jacks for inputting audio. Use both the L/MONO and R jacks when con-
necting from audio equipment in stereo, and use only the L/MONO jack when connecting a monaural
audio device or mic to this instrument. Dynamic mics can be used with the Grandstage X.
Note:
If you want to connect a condenser mic to this device, route it through a mic preamp or other phantom
power supply.
Note:
The AUDIO IN signal is mixed with the sound of this instrument only when the AUDIO IN button on the right
side of the operating panel is on (the button lights up).
MIC/LINE switch
Set the switch to the MIC position when you connect a microphone to this instrument. Set the switch
to the LINE position when connecting other audio equipment or musical instruments.
LEVEL knob
Adjusts the input volume.
→ Connecting a mic and playing with this instrument
→ Connecting and playing with a sound source
3 FOOT CONTROLLERS
DAMPER jack
Connect the damper pedal DS-1H included with the Grandstage X.
SWITCH jack
Connect a foot switch (sold separately) here.
PEDAL jack
Connect an expression pedal or foot controller (sold separately) here.
→ Foot controllers
4 MIDI
IN connector, OUT connector
These connectors allow the Grandstage X to exchange MIDI messages with an external MIDI device.
→ MIDI connections and settings
5 SD CARD slot
You can use a commercially available SD card to load and save the favorites data from/to the Grand-
stage X. For instance, you can load the favorites data you saved on the Grandstage X in your home
into a Grandstage X at a live performance venue or rehearsal studio, which lets you use the same
favorites right away.
→ Storage media that can be used
6 USB-B port
To Next Page
Loading...
